The instructions come with the the plane and in 5 languages. There are some dating notes on Woden block planes at the end and more detailed information is Other pointers include plane packaging, instructions and tool dealer prices, if marked. Limited quantity However, the cutters can be used in later types and adjusted manually. This plane was a popular choice for manual training due to is smaller size. The cam, slitter, screwdriver, original instructions are all included. The tongue cutter for the 45 has an adjustable piece that covers the center tongue of the cutter. Check Out More Details. Check out the world’s first ever vertical takeoff plane! Secondly, although the Sargent was a cosmetic copy of the Stanley 45, An accurate date is not that critical, unless you are interested in the planes value.

Sargent Hand Planes by the number–with pictures.

A general description of stuff to look for when examining a bench plane is listed under the 3 smoother. This stuff is applicable to all Stanley bench planes, and comes from my observances of literally hundreds, if not thousands, of these planes. It never has a number cast on it, nor was it ever provided a lateral adjustment lever. The plane always has a solid brass nut for the iron’s depth adjustment.

Oh Stanley Handyman Planes – Woodworking Talk The lower end lines of planes, Handyman, Defiance, Craftsman, etc. were manufacturer to be priced less than other lines of planes, like the Stanley-Bailey, Stanley-Bedrock, etc. In order to reduce manufacturing costs, some cost .

Hand Planes Hand planes are tools for shaping wood. They are used to flatten, reduce the thickness of, and smooth the surface of a rough piece of lumber. Planing is also used to produce horizontal, vertical, or inclined flat surfaces on work pieces usually too large for shaping. Many special types of planes are designed to cut specific shapes of moldings or to cut joints. Hand planes are generally a combination of a cutting edge or plane iron held in a firm body that when moved across the surface of the wood, takes a relatively uniform and thin shaving.

Depending on the length of the plane, when moved over the surface, removes the high spots in the wood. Planes are designed so the the cutting edge or plane iron is held at an angle to the surface of the wood. The plane iron extends beyond the bottom surface or sole of the plane and slices off thin shavings of wood when pushed across the surface. History of Hand Planes Hand planes have been around since ancient times. Early planes were made of wood with a mortise rectangular slot cut across the plane body so the blade could protrude below the surface of the base.

Stanley Bedrock No 605 1/2 C Plane Type 3 1900-1908 Extra Wide Antique Tool

However, much has happened since it went up, including the Blogger outage. Scroll down for a report on that. More new posts will be added below this one. The essay below is the conclusion of the ninth part in a series by Takuan Seiyo. See the list at the bottom of this post for links to the previous installments. Their main endeavor has been to enforce their compulsory e.

A while back I had been contacted by a client wanting to have restored (3) of these Stanley hand planes. There was a Bedrock C, a Stanley/Bailey no.5C and a Stanley/Bailey no. 10/1/2 rabeting plane.

Handles were made of beautiful woods such as Brazilian rosewood, chosen for its durability, and the metal surfaces were often highly detailed. This combination means that many of the tools still around today have held up well and can be in demand. The description of each tool includes a grade of its condition and any flaws that are apparent. Their stock changes frequently and contains bevels and planes. Patented Antiques Patented-Antiques sells many types of antique tools, including those by Stanley.

They are conservative in their condition estimates and list new items frequently. They separate their tools by category, not by manufacturer, so you may have to dig to find those by Stanley. Some tools carried include a mint condition level sight and several varieties of planes. While some antique Stanley tools are valuable, the vast majority of them are not.

Stanley Bedrock No 605 C Plane Type 6 1914-1918 Antique Tool

Ice-sheet dynamics Sampling the surface of Taku Glacier in Alaska. There is increasingly dense firn between surface snow and blue glacier ice. An ice core is a vertical column through a glacier, sampling the layers that formed through an annual cycle of snowfall and melt. At Summit Camp in Greenland, the depth is 77 m and the ice is years old; at Dome C in Antarctica the depth is 95 m and the age years. The bubbles disappear and the ice becomes more transparent.

Ice is lost at the edges of the glacier to icebergs , or to summer melting, and the overall shape of the glacier does not change much with time.

Four categories seem sufficient to describe and roughly date a plane: Pre-lateral for any plane that has no side adjusting mechanism for the cutter, low knob, SW model or tall knob (SW stands for Stanley Works but is usually called Sweetheart) and late models for WW2 vintage and later.

The following history is excerpted from a Tool Talks publication by Stanley Tool: The manufacture of “Bailey” Planes by Stanley marked a turning point in the Company’s history. Stanley’s dominant position was recognized by carpenters and mechanics everywhere who turned over their problems and suggestions to the Company. This created a demand for specialized tools to perform certain jobs better than they could be done with regular size or style tools. Stanley responded by increasing its line to still greater proportions to include many more hand tools that helped craftsmen do better work.

A search of the U. In the George E.

Stanley bedrock plane dating

Three hand saws inc. Three Disston hand saws inc. Two Keen Kutter saws: Needs a light cleaning, good etch.

Over 50 pages of new information on Stanley and Bailey planes. Planemakers up to 45 & 55 comb. planes, hammers, screwdrivers, Everlasting chisels and mitre boxes.. The information is up-to-date and reflects the current trends in collecting.. 45 Plane Stanley No. 45 .

Planes made in Boston, MA from Rosewood knob is shaped like a hot air balloon, and has a distinct bead turned into its base. The nut has a right-hand thread. The back of the lever cap is solid and has a banjo-shaped spring. The frog has a rounded back the top of it where it faces the tote. It is held into place by screws with round heads. The bottom casting’s receiver for the frog is shaped like the letter “I”.

Tag: Bedrock

Please let me know of other handtool resources that could be reborn to hypertext. Results 1 XVI of 16 nowadays Stanley builds on their copious story offering quality hand planes true to Bailey and his work. I’ve assembled axerophthol duet of resource pages related to stanley bench planes. Within their late five playoff appearances they had neglected to win an someone series.

ROCK STEADY: Stanley Rule and Level Co. introduced a new line of planes in that held the plane iron (cutter) so steady that the company dubbed them “Bedrock.” Patented in by Stanley’s.

Renfrewshire information pages Listed below are details on history and points of interest. All towns and villages in the current county of Renfrewshire are listed. If you are having trouble finding something specific, or looking for a specific name, please use the search box at the top of the left-hand index column. This search engine will check www. Please note, if you are searching two or more words eg.

Bill Smith, place the words inside quotation marks eg. Note that some war memorial name lists have first and last names listed while some have initial and surname only. The area is centred on the council-built tenements, although some late Victorian buildings exist along the western end of Seedhill Road.

At this point the area is serviced by Hawkhead station on the Paisley Canal line. There is also some light industry in the area. This was originally built as an aqueduct for the Glasgow, Paisley and Johnstone Canal in The canal was filled in and converted to carry a new railway in

Stanley’s cute little #1 hand plane- What was it for, and why’s it so rare?